Crankshaft End Play
SPECIAL TOOL(S)
 Courtesy of FORD MOTOR COMPANY
|
Dial Indicator Gauge With Holding Fixture 100-002 TOOL-4201-C |
General Procedure
NOTE:
Refer to general specifications in the appropriate Engine article for the appropriate specification.
- 1.
Install the Dial Indicator Gauge with Holding Fixture.
- 2.
Position the crankshaft to the rear of the cylinder block.
- 3.
Zero the Dial Indicator Gauge.
- 4.
Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
 Courtesy of FORD MOTOR COMPANY
|