Cylinder Head Temperature (CHT) Sensor - 3.5L GTDI: Removal

NOTE: Removal steps in this procedure may contain installation details.

• 1.
  
  Remove the ACL outlet pipe. REFER to Intake Air Distribution and Filtering .

• 2.
  
  Position the RH turbocharger intake tube aside.
  • Loosen the clamp, remove the nut from the RH valve cover stud bolt and position aside the RH turbocharger intake tube.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  
  • To install, tighten to 10 N m (89 lb-in).

Courtesy of FORD MOTOR COMPANY