Fuel Rail Pressure (FRP) Sensor - 2.0L GTDI: Installation

• 1.
  
  Install the FRP sensor and tighten in the following 5 stages:
  • Stage 1: Tighten to 6 Nm (53 lb-in).
  • Stage 2: Tighten an additional 5 degrees.
  • Stage 3: Loosen 90 degrees.
  • Stage 4: Tighten to 6 Nm (53 lb-in).
  • Stage 5: Tighten an additional 21 degrees.

Courtesy of FORD MOTOR COMPANY

• 2.
  
  Connect the FRP sensor electrical connector.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Install the upper CAC inlet tube and intermediate CAC inlet tube. REFER to Intake Air Distribution and Filtering .