Section 3 (Engine - 3.5L GTDI): Assembly: Engine: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tool(s)
| 2, 200# Floor Crane, Fold Away 300-OTC1819E or equivalent | |
| Alignment Pins 307-399 | |
| Brush, Fuel Injector 310-205 | |
| Compressor, Piston Ring 303-D032 (D81L-6002-C) | |
| Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) | |
| Engine Lift Eye 303-1245 | |
| Handle 205-153 (T80T-4000-W) | |
| Installer, Crankshaft Vibration Damper 303-102 (T74P-6316-B) | |
| Installer, Front Cover Oil Seal 303-335 | |
| Installer, Front Crankshaft Seal 303-1251 | |
| Installer, VCT Spark Plug Tube Seal 303-1247/2 | |
| Seal Installer, Fuel Injector 310-207 | |
| Tool, Camshaft Holding 303-1248 |
General Equipment
| 3/8" Spring Lock Coupling Disconnect Tool |
| Engine Stand |
| Feeler Gauge |
| Hexagonal Screwdriver |
| Hose Clamp Remover/Installer |
| Lock Pin |
| Piston Ring Compressor |
| Spreader Bar |
| Strap Wrench |
Material
| Item | Specification |
| Motorcraft ® High Performance Engine RTV Silicone TA-357 | WSE-M4G323-A6 |
| Motorcraft ® Metal Surface Prep ZC-31-B | - |
| Motorcraft ® SAE 5W-30 Premium Synthetic Blend Motor Oil (US); Motorcraft ® SAE 5W-30 Super Premium Motor Oil (Canada) XO-5W30-QSP (US); CXO-5W30-LSP12 (Canada) | WSS-M2C946-A |
| Motorcraft ® Silicone Gasket Remover ZC-30-A | - |
| Motorcraft ® Orange Concentrated Antifreeze/Coolant VC-3-B (US); CVC-3-B2 (Canada) | WSS-M97B44-D |
| Motorcraft ® Thread Sealant with PTFE TA-24-B | WSK-M2G350-A2 |