Compressor to Condenser Discharge Line - 3.5L Ti-VCT: Removal

WARNING: Before beginning any service procedure in this service information, refer to SAFETY WARNINGS

1. 1.
   
   With the vehicle in NEUTRAL, position it on a hoist. REFER to Jacking and Lifting .

1. 2.
   
   Recover the refrigerant. Refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging .

1. 3.
   
   Release the 3 twist lock retainers and remove the underbody air duct.

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   Remove the rear A/C compressor bolt.

1. 5.
   
   Remove the A/C compressor discharge fitting nut and disconnect the fitting.
   • Discard the O-ring seal and gasket seal.

1. 6.
   
   Disconnect the A/C pressure transducer electrical connector.

1. 7.
   
   Remove the condenser inlet fitting nut and disconnect the fitting.
   • Discard the O-ring seal and gasket seal.

1. 8.
   
   Remove the compressor-to-condenser discharge line.