D-Pillar Trim Panel: Installation

NOTE: To avoid damage to the D-Pillar trim panel, remove any retaining clips from the body and attach them to the D-pillar trim panel before installing.

1.

Install the D-pillar trim panel.
- 1.
  
  Slide the third row safety belt through the D-pillar trim panel.
- 2.
  
  If equipped, connect the D-pillar speaker electrical connector.
- 3.
  
  Connect the D-pillar trim panel to the body.

2.

Install the D-pillar trim panel bolt.
- 1.
  
  Tighten to 9 Nm (80 lb-in).

3.

Position back the liftgate weatherstrip.

4.

Install the quarter trim panel. Refer to Quarter Trim Panel - With Inflatable Safety Belts or Refer to Quarter Trim Panel - Without Inflatable Safety Belts .