Safety Belt Shoulder Height Adjuster: Removal

WARNING: All seatbelt components must be inspected and corrected as part of any collision repair. Inspect all seatbelt components as prescribed by Seatbelt Procedure After a Collision found in GENERAL PROCEDURES . Failure to follow this instruction may result in incorrect operation of the seatbelt system and increase the risk of serious personal injury or death in a crash.

1.

Remove the B-pillar trim panels. REFER to Interior Trim and Ornamentation .

2.

Remove the bolt and the D-ring.

3.

Remove the safety belt shoulder height adjuster in the following sequence.
1. 1.
  
  Remove the safety belt shoulder height adjuster bolt.
1. 2.
  
  Rotate the top of the safety belt shoulder height adjuster down 90.
1. 3.
  
  Turn the bottom of the safety belt shoulder height adjuster, disengaging the T-tab from the B-pillar sheet metal and remove the safety belt shoulder height adjuster.