Safety Belt Shoulder Height Adjuster: Installation

1.

Install the safety belt shoulder height adjuster in the following sequence.
1. 1.
  
  Engage the safety belt shoulder height adjuster T-tab to the B-pillar sheet metal.
1. 2.
  
  Rotate the top of the safety belt shoulder height adjuster up 90.
1. 3.
  
  Install the safety belt shoulder height adjuster bolt.
  - Tighten to 40 Nm (30 lb-ft).

2.

NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

Position the D-ring and install the bolt.
1. 1.
  
  Tighten to 40 Nm (30 lb-ft).

3.

Install the B-pillar trim panels. REFER to Interior Trim and Ornamentation .