Upper Arm: Removal
- 1.NOTE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
Measure the distance from the center of the wheel hub to the lip of the fender with the vehicle in a level, static ground position (curb height).
- 2.
Remove the rear wheels and tires. REFER to Wheels and Tires
- 4.NOTE: Do not allow the brake caliper to hang from the brake flexible hose or damage to the hose may occur.
Remove the 4 brake caliper anchor plate bolts and position the LH and RH brake caliper and anchor plate assemblies aside.
- Support the brake caliper and anchor plate assemblies using mechanic's wire.
- 8.NOTE: Use the hex-holding feature to prevent the stabilizer bar link stud from turning while removing the nut.
Remove and discard the LH and RH stabilizer bar link upper nuts and disconnect the links from the stabilizer bar.