Shock Absorber: Installation

1.

NOTE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Position the shock absorber and install a new shock absorber lower bolt.
- Tighten to 175 Nm (129 lb-ft).

2.

NOTE: Use the hex-holding feature to prevent the stabilizer bar link stud from turning while installing the nut.

Position the stabilizer bar link to the bar and install a new stabilizer bar link upper nut.
- Tighten to 55 Nm (41 lb-ft).

3.

Install the wheel and tire. REFER to Wheels and Tires

4.

Install a new shock absorber upper insulator and nut.
- 1.
  
  Install the access cover.
- 2.
  
  Install the storage area rubber mat.
- 3.
  
  Tighten to 55 Nm (41 lb-ft).