Stabilizer Bar Link: Installation

1.

NOTE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

NOTE: Use the hex-holding feature to prevent the stabilizer bar link stud from turning while installing the nut.

Position the stabilizer bar link and install the new stabilizer bar link upper nut.
- Tighten to 55 Nm (41 lb-ft).

2.

Install the new stabilizer bar link lower nut
- Tighten to 55 Nm (41 lb-ft).