Wheel Bearing and Wheel Hub - All Wheel Drive (AWD): Removal

• 1.
  
  
  NOTE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

  Remove the rear brake disc. REFER to Rear Disc Brake

• 2.
  
  Remove the wheel speed sensor bolt and position the sensor aside.

• 3.
  
  
  NOTE: Do not discard the nut at this time.

  Remove the wheel hub nut.

• 4.
  
  Using the 205-D070 (D93P-1175-B), separate the halfshaft from the wheel hub.

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Remove and discard the 4 wheel bearing and wheel hub bolts and remove the wheel bearing and wheel hub.