Bumper - Rear: Installation

NOTE: Left Hand (LH) side shown in illustration RH side similar.

1.
Install the bumper.
- 1.
  
  Position the bumper to the vehicle.
- 2.
  
  Install the upper bumper nuts and lower bumper bolts.
  - Tighten finger tight.
- 3.
  
  Tighten the upper bumper nuts.
  - Tighten to 40 Nm (30 lb-ft).
- 4.
  
  Tighten the lower bumper bolts.
  - Tighten to 40 Nm (30 lb-ft).

GFD37773

Courtesy of FORD MOTOR COMPANY

2.

Install the bumper cover. Refer to Bumper Cover - Rear .