PINPOINT TEST H : The Body Control Module Will Not Enter TPMS Sensor Training Mode: Notes

Diagnostic Overview 

The Body Control Module Will Not Enter TPMS Sensor Training Mode 

Normal Operation and Fault Conditions 

Refer to Tire Pressure Monitoring System , TPMS Function.

For the BCM to enter TPMS sensor training mode, the BCM must receive valid inputs from the stoplamp switch (OFF) and ignition switch (RUN), and it must receive a valid vehicle speed sensor input of 0 km/h (0 mph). Refer to Tire Pressure Monitoring System (TPMS) Sensor Training - Intelligent Access (IA)  or refer to Tire Pressure Monitoring System (TPMS) Sensor Training - Integrated Keyhead Transmitter (IKT)  for the complete sensor training procedure.

Visual Inspection and Diagnostic Pre-checks 

• Inspect for correct stoplamp operation.