PINPOINT TEST I : One or More Tire Pressure Monitoring System Sensors Do Not Train and No DTCs are Present
- I1 ATTEMPT TO TRAIN THE TPMS SENSORS
-
NOTE: The BCM has a 2-minute time limit between sensor responses. If the BCM does not recognize any of the 4 TPMS sensors during this time limit, the horn sounds twice, the message center displays TIRE NOT TRAINED REPEAT, and the entire procedure must be repeated.
TRAIN all 4 TPMS sensors. Refer to Tire Pressure Monitoring System (TPMS) Sensor Training - Intelligent Access (IA) or refer to Tire Pressure Monitoring System (TPMS) Sensor Training - Integrated Keyhead Transmitter (IKT) .
Do all of the TPMS sensors train?
Yes The system is operating correctly at this time. The concern may have been caused by RFI. No If one or more sensors trained, GO to I2. If none of the TPMS sensors trained, GO to Pinpoint Test F . -
- I2 CHECK FOR RFI
- Ignition ON.
- Move the vehicle to rotate the wheels at least one-fourth turn.
- TRAIN all 4 TPMS sensors. Refer to Tire Pressure Monitoring System (TPMS) Sensor Training - Intelligent Access (IA) or refer to Tire Pressure Monitoring System (TPMS) Sensor Training - Integrated Keyhead Transmitter (IKT) .
Did the TPMS sensor(s) train?
Yes The system is operating correctly at this time. The concern may have been caused by RFI. No INSTALL a new TPMS sensor(s) for the sensor(s) in question. REFER to Tire Pressure Monitoring System (TPMS) Sensor .