PINPOINT TEST C : An Exterior Mirror LED Is Constantly On and An IPC Message Is Present
- C1 VERIFY THE SOD-L AND SOD-R PASS THE NETWORK TEST
- Using a scan tool, perform a network test.
Do the SOD-L and SOD-R pass the network test?
Yes GO to C2. No For SOD-L, Refer to article 'Module Communications Network', Go to Pinpoint Test V . For SOD-R, GO to Pinpoint Test E . - C2 CHECK FOR VEHICLE SPEED SIGNAL OR PRNDL RELATED DTCs
- Using a scan tool, perform the BCM self-test.
- Check for DTCs in the BCM.
Are any vehicle speed or PRNDL related DTCs present?
Yes REFER to Multifunction Electronic Modules . No GO to C3. - C3 CHECK FOR PAM DTCs
- Using a scan tool, perform the PAM self-test.
Are DTCs present?
Yes REFER to Parking Aid . No For a BLIS ® fault, GO to Pinpoint Test A . For a CTA system fault, GO to Pinpoint Test B .