| Differential carrier baffle bolts |
- |
12 Nm (106 lb-in) |
| Fluid reservoir bolts |
7J283 |
12 Nm (106 lb-in) |
| Fluid pump-to-torque converter housing bolts |
- |
12 Nm (106 lb-in) |
| Line pressure tap plug |
7A010 |
9 Nm (80 lb-in) |
| Main control cover bolts |
- |
For 3.5L GTDI refer to, Main Control Cover - 3.5L GTDI . For 3.5L Ti-VCT refer to, Main Control Cover - 3.5L Ti-VCT . |
| Main control valve body bolts |
- |
Refer to Main Control Valve Body . |
| Main control lever nut |
- |
Refer to Manual Control Lever Shaft Seal . |
| OSS sensor bolt |
7J283 |
12 Nm (106 lb-in) |
| Park pawl retainer bolts |
7J283 |
12 Nm (106 lb-in) |
| Roll restrictor bracket bolts - AWD |
- |
90 Nm (66 lb-ft) |
| Roll restrictor bracket bolts - FWD |
- |
103 Nm (76 lb-ft) |
| Roll restrictor-to-subframe clevis bolt |
- |
103 Nm (76 lb-ft) |
| Selector lever cable bracket bolts |
W500213 |
12 Nm (106 lb-in) |
| Shim gauge bolts |
- |
24 Nm (18 lb-ft) |
| Solenoid body bolts |
- |
Refer to Solenoid Body Assembly . |
| Starter battery terminal |
W706414 |
12 Nm (106 lb-in) |
| Starter motor stud bolts |
- |
26 Nm (19 lb-ft) |
| Starter solenoid terminal |
N805320 |
6 Nm (53 lb-in) |
| Stator support feed tube bolts (hex head) |
7J284 |
12 Nm (106 lb-in) |
| Stator support feed tube bolts (Torx head) |
7J330 |
7 Nm (62 lb-in) |
| Stator support-to-torque converter housing bolts |
- |
Refer to Transaxle - Overhaul |
| Torque converter bolts |
- |
Refer to Transmission - All Wheel Drive (AWD) or Transmission - Front Wheel Drive (FWD) or Transmission - 3.5L GTDI . |
| Torque converter housing bolts |
W711937 |
48 Nm (35 lb-ft) |
| Transmission support insulator upper bolts |
- |
70 Nm (52 lb-ft) |
| Transmission support insulator lower bolts |
- |
55 Nm (41 lb-ft) |
| Transmission support insulator bracket bolt |
- |
80 Nm (59 lb-ft) |
| Transmission support insulator bracket nuts |
- |
63 Nm (46 lb-ft) |
| Transmission fluid cooler thermal bypass valve bracket nuts |
- |
9 Nm (80 lb-in) |
| Transmission mounted transmission fluid cooler tube bolt |
- |
9 Nm (80 lb-in) |
| Transmission mounted transmission fluid cooler tube fittings |
- |
30 Nm (22 lb-ft) |
| Transmission fluid drain plug |
7A010 |
9 Nm (80 lb-in) |
| TSS sensor bolt |
- |
12 Nm (106 lb-in) |
| Torque converter housing-to-transmission case bolts |
- |
Refer to Transaxle - Overhaul |
| Valve body assembly bolts |
- |
12 Nm (106 lb-in) |