Pinpoint Test U: PCA: Notes
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to Transmission Controls - 6F50/6F55 for schematic and connector information.
Normal Operation and Fault Conditions
The PCA (LPC) solenoid is a VFS. The PCA is an electro-hydraulic actuator combining a solenoid and a regulating valve. It supplies the pressure which regulates transmission line pressure. This is done by producing resisting forces to the main regulator and line modulator circuits.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0748 | Pressure Control Solenoid "A" Stuck On | PCA electrical circuit general fault. May set along with P0960, P0962 and P0963. |
| P0960 | Pressure Control Solenoid "A" Control Circuit/Open | Open circuit in solenoid or solenoid circuitry. |
| P0961 | Pressure Control Solenoid "A" Control Circuit Range/Performance | Intermittent short to ground in solenoid or solenoid circuitry. |
| P0962 | Pressure Control Solenoid "A" Control Circuit Low | Short to ground in solenoid or solenoid circuitry. |
| P0963 | Pressure Control Solenoid "A" Control Circuit High | Short to power in solenoid circuitry. |
Possible Sources
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- PCA
- PCM