LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6F50/6F55 >> Removal And Installation >> Solenoid Body Assembly >> Removal

Solenoid Body Assembly: Removal

NOTE: The PCM must be updated with a new solenoid body strategy data file and solenoid body identification anytime a new solenoid body is installed. A new solenoid body service tag must be installed over the current solenoid body service tag on top of the transmission case.

  1. 1.

    With the vehicle in NEUTRAL, position it on a hoist. REFER to Jacking and Lifting .

  1. 2.

    Remove the main control cover. For 3.5L GTDI refer to, Main Control Cover - 3.5L GTDI . For 3.5L Ti-VCT refer to, Main Control Cover - 3.5L Ti-VCT .

  1. 3.

    Slide the TR sensor electrical connector lock tab over.
GFD36267Courtesy of FORD MOTOR COMPANY

  1. 4.

GFD36268Courtesy of FORD MOTOR COMPANY

  1. 5.

GFD36275Courtesy of FORD MOTOR COMPANY
    NOTE: Handle the solenoid body with care or damage to the solenoid body may occur.

  1. 6.
GFD36269Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals