Pinpoint Test E : Shift Solenoid E: Notes
WARNING: This page is about a different variant/trim than selected.
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to Transmission Controls-6F35 for schematic and connector information.
Normal Operation and Fault Conditions
SSE controls the multiplexing of the SSD low/reverse and overdrive clutch. If SSE fails off (no pressure) then 1st gear is failed to 4th gear. If clutch select valve 2 sticks in the default position then 1st gear with engine braking is failed to 4th gear and reverse is failed to neutral. SSE is an On/Off solenoid.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0770 | Shift Solenoid "E" | Open, short to power or short to ground in the solenoid or wire harness. |
| P0773 | Shift Solenoid "E" Electrical | Open or short to ground in the solenoid or wire harness. |
| P0774 | Shift Solenoid "E" Intermittent | Intermittent circuit in the solenoid or wire harness open, shorted to ground or shorted to power. |
Possible Sources
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- SSE
- TCM