Transmission Case Bushing: Removal

WARNING: This page is about a different variant/trim than selected.

1.

Remove the 4 retainers and the underbody shield.

Courtesy of FORD MOTOR COMPANY

2.

Remove the front LH halfshaft. Refer to Halfshaft Seal - LH .

NOTE: Leave the drain plug out after the transmission fluid drains. The drain plug will need to remain out to clean any debris from the damaged or worn bushing.

3.
Remove the drain plug and drain the transmission fluid.

Courtesy of FORD MOTOR COMPANY

4.

Install 205-D015 D80L-630-4 in the differential carrier.

Courtesy of FORD MOTOR COMPANY

5.

Using 308-070 T77L-7697-E remove the LH halfshaft bushing.

Courtesy of FORD MOTOR COMPANY

6.

Remove 205-D015 D80L-630-4 from the differential carrier.

Courtesy of FORD MOTOR COMPANY