LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Tests >> Pinpoint Test G : U0104:00 >> Pinpoint Test G : U0104:00

Pinpoint Test G : U0104:00

  1. G1 CHECK THE COMMUNICATION NETWORK

    • Ignition ON.
    • Using a diagnostic scan tool, carry out the network test.

    Does the C-CM pass the network test? 

    Yes  GO to  G2.
    No  Refer to article 'Module Communications Network', Go to Pinpoint Test U .
  2. G2 CHECK THE ABS MODULE CMDTCs

    • Ignition ON.
    • Using a diagnostic scan tool, carry out the ABS module self-test.
    • Clear the DTCs.
    • Ignition OFF.
    • Ignition ON.
    • Repeat the ABS module self-test.
    • Record the ABS module DTCs.

    Is DTC U0104:00 retrieved again? 

    Yes  GO to  G3.
    No  The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition.
  3. G3 REVIEW THE RECORDED DTCs FROM THE ABS MODULE SELF-TEST

    • Check the recorded DTCs from the ABS module self-test.

    Is DTC U3003:16 or U3003:17 present? 

    Yes  For DTC U3003:16, GO to Pinpoint Test A . For DTC U3003:17, GO to Pinpoint Test P .
    No  GO to  G4.
  4. G4 CHECK FOR DTCs IN THE C-CM

    • Using a diagnostic scan tool, carry out the C-CM self-test.

    Is DTC U3003:16 or U3003:17 present? 

    Yes  For DTC U3003:16, Refer to article 'Cruise Control Adaptive', Go to Pinpoint Test Q . For DTC U3003:17, Refer to article 'Cruise Control Adaptive', Go to Pinpoint Test R .
    No  GO to  G5.
  5. G5 CHECK FOR DTC U0104:00 SET IN OTHER MODULES

    • Ignition ON.
    • Using a diagnostic scan tool, carry out the self-test for all modules.
    • Retrieve the CMDTCs from all modules.

    Is DTC U0104:00 set in any other modules? 

    Yes  CHECK OASIS for any applicable TSBs. If a TSB exists for this concern, DISCONTINUE this test and FOLLOW the TSB instructions. If no TSBs address this concern, INSTALL a new C-CM. REFER to Cruise Control Adaptive .
    No  CHECK OASIS for any applicable TSBs. If a TSB exists for this concern, DISCONTINUE this test and FOLLOW the TSB instructions. If no TSBs address this concern and the vehicle is not equipped with adaptive cruise control, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . If no TSBs address this concern and the vehicle is equipped with adaptive cruise control, INSTALL a new ABS module and HCU. REFER to Hydraulic Control Unit (HCU) .