LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.5L Ti-VCT >> Removal And Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

  1. 1.

    Clean all sealing surfaces with Motorcraft ® Metal Surface Prep.
    NOTE: Apply clean Motorcraft ® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft ® SAE 5W-20 Super Premium Motor Oil (Canada) to the crankshaft front seal bore in the engine front cover.

  1. 2.
    Using 303-1251 and 303-102 T74P-6316-B, install a new crankshaft front seal.
GFD34569Courtesy of FORD MOTOR COMPANY
    NOTE: Apply clean Motorcraft ® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft ® SAE 5W-20 Super Premium Motor Oil (Canada) to the crankshaft front seal contact surface.
    NOTE: Do not use grease on seal or pulley hub as this may result in premature seal failure.

  1. 3.
    Install the crankshaft pulley. Refer to Crankshaft Pulley .
scientia non olet · About LEMON Manuals