LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.5L Ti-VCT >> Removal And Installation >> Engine Oil Pressure (EOP) Switch >> Installation

Engine Oil Pressure (EOP) Switch: Installation

    NOTE: Apply Thread Sealant with PTFE to the EOP switch threads prior to installation.

  1. 1.
    Install the EOP switch.
    • Tighten to 14 Nm (124 lb-in) plus an additional 180 degrees.
GFD34658Courtesy of FORD MOTOR COMPANY

  1. 2.

    Connect the EOP switch electrical connector.
GFD34657Courtesy of FORD MOTOR COMPANY

  1. 3.

    If equipped, install the engine oil cooler. Refer to Oil Cooler .
scientia non olet · About LEMON Manuals