- 1.
Using new gaskets, install the oil cooler and the 6 bolts.
- Tighten in the sequence shown to 10 Nm (89 lb-in).
Courtesy of FORD MOTOR CO.
- 2.
Install the 2 coolant hoses to the oil cooler.
- Remove the 2 hose clamp pliers.
 Courtesy of FORD MOTOR COMPANY
|
NOTE:
Do not lubricate the engine oil filter gasket.
- 3.
Install a new engine oil filter.
- Tighten to 5 Nm (44 lb-in), then turn an additional 180 degrees.
 Courtesy of FORD MOTOR COMPANY
|