Cylinder Head: Disassembly
NOTE:
If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their original locations.
- 1.
Using the 303-300 T87C-6565-A, 303-350 T89P-6565-A and 303-1249, remove the keys, retainer and spring.
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Remove and discard the valve stem seal.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Remove the valve from the cylinder head.
- Repeat the above steps for each valve.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Remove the timing chain guide pin.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Remove the timing chain tensioner arm pin from the RH cylinder head.
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Remove and discard the CHT sensor from the RH cylinder head.
 Courtesy of FORD MOTOR COMPANY
|