LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.5L Ti-VCT >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Assembly

Cylinder Head: Assembly

  1. 1.

    Install the valve.
GFD34796Courtesy of FORD MOTOR COMPANY
    NOTE: Lubricate the valve stem seal with clean engine oil prior to installation.

  1. 2.
    Using the 303-470 T94P-6510-CH, install a new valve stem seal.
GFD34800Courtesy of FORD MOTOR COMPANY

  1. 3.

    Using the 303-300 T87C-6565-A, 303-350 T89P-6565-A and 303-1249, install the valve spring, retainer and key.
    • Repeat the above steps for each valve.
GFD34795Courtesy of FORD MOTOR COMPANY

  1. 4.

    Install the timing chain guide pin.
    • Tighten to 10 Nm (89 lb-in).
GFD34797Courtesy of FORD MOTOR COMPANY

  1. 5.

    Install the timing chain tensioner arm pin on the RH cylinder head.
    • Tighten to 10 Nm (89 lb-in).
GFD34798Courtesy of FORD MOTOR COMPANY

  1. 6.

    Install a new CHT sensor in the RH cylinder head.
    • Tighten to 10 Nm (89 lb-in).
GFD34799Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals