Ignition Coil-On-Plug - RH: Removal

WARNING: Before beginning any service procedure in this service information, refer to SAFETY WARNINGS

1.

NOTE: The upper intake manifold must be removed to access the RH ignition coil-on-plugs.

Remove the upper intake manifold, refer to ENGINE - 3.5L TI-VCT .

2.

NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.

Disconnect the 3 RH ignition coil-on-plug electrical connectors.

3.

Remove the 3 RH ignition coil-on-plug bolts.

4.

NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

Remove the 3 RH ignition coil-on-plugs.