PINPOINT TEST C : The Adjustable Pedals Only Move in 1-Second Intervals

C1 CHECK THE SCCM DTCs

Were DTCs B1368:11 or B1368:12 retrieved?

Yes	GO to C2.
No	If no DTCs were retrieved, CONFIGURE the SCCM using as-built data. TEST the system for normal operation. If any other SCCM DTCs were retrieved, REFER to Steering Column Switches .

C2 CHECK THE SCCM HALL-EFFECT CIRCUITS FOR A SHORT TO VOLTAGE

Measure:

Positive Lead	Measurement / Action	Negative Lead
C2414C-3	Courtesy of FORD MOTOR COMPANY	Ground
C2414C-6	Courtesy of FORD MOTOR COMPANY	Ground

Is any voltage present?

Yes	REPAIR the affected circuit.
No	GO to C3.

C3 CHECK THE SCCM HALL-EFFECT CIRCUITS FOR A SHORT TO GROUND

Measure:

Positive Lead	Measurement / Action	Negative Lead
C2414C-3	Courtesy of FORD MOTOR COMPANY	Ground
C2414C-6	Courtesy of FORD MOTOR COMPANY	Ground

Are the resistances greater than 10, 000 ohms?

Yes	GO to C4 .
No	REPAIR the affected circuit.

C4 CHECK THE SCCM HALL-EFFECT CIRCUITS FOR AN OPEN

Measure:

Positive Lead	Measurement / Action	Negative Lead
C2003-3	Courtesy of FORD MOTOR COMPANY	C2414C-3
C2003-4	Courtesy of FORD MOTOR COMPANY	C2414C-6

Are the resistances less than 3 ohms?

Yes	GO to C5 .
No	REPAIR the affected circuit.

C5 CHECK THE SCCM HALL-EFFECT CIRCUITS FOR A SHORT TOGETHER

Measure:

Positive Lead	Measurement / Action	Negative Lead
C2414C-3	Courtesy of FORD MOTOR COMPANY	Ground

Is the resistance greater than 10, 000 ohms?

Yes	INSTALL a new adjustable pedal motor and bracket assembly, REFER to Acceleration Control . CLEAR the DTCs. REPEAT the self-test. If DTC B1368:11 or B1368:12 return, INSTALL a new SCCM, REFER to Steering Column Switches .
No	REPAIR the circuit.