PINPOINT TEST E : The Adjustable Pedals are inoperative or Do Not Operate Correctly - Using the Memory SET Switch Buttons or the RKE Transmitter: Notes

Diagnostic Overview 

The Adjustable Pedals are inoperative or Do Not Operate Correctly - Using the Memory SET Switch Buttons or the RKE Transmitter 

Refer to Adjustable Pedal for schematic and connector information.

Normal Operation and Fault Conditions 

When the desired memory position is selected using the memory SET switch, the DSM communicates the desired pedal position in a message on the MS-CAN to the BCM. The BCM-B acts as a gateway module, relaying the message to the SCCM over the HS-CAN. The SCCM then sends current to the adjustable pedal motor to move the pedals to the required position.

When the vehicle is unlocked using the RKE feature, a message is sent from the TPM module along a hard wired circuit to the RFA module. The RFA module then sends the message on the MS-CAN to the BCM. The BCM transmits the message on the HS-CAN to the SCCM. The SCCM sends current to the adjustable pedal motor to move the pedals to the position programmed to the key.