Selector Lever Cable Adjustment - 6F50 6F55

General Procedure 

1. 1.
   
   Disconnect the selector lever cable end from the manual control lever.

Courtesy of FORD MOTOR COMPANY

1. 2.
   
   Place the selector lever in DRIVE.

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   Place the manual control lever in DRIVE.

   1. 1.
      
      Rotate the manual control lever clockwise until it stops.

   1. 2.
      
      Rotate the manual control lever counterclockwise one detent.

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   Unlock the adjuster.

   1. 1.
      
      Pry the latch up.

   1. 2.
      
      Push the lock tab to slide it over.

Courtesy of FORD MOTOR COMPANY

1. 5.
   
   Slide the selector lever cable end forward or backward to align it with the manual control lever.

Courtesy of FORD MOTOR COMPANY

1. 6.
   
   With the adjuster locking tab released, connect the selector lever cable end to the manual control lever.

Courtesy of FORD MOTOR COMPANY

1. 7.
   
   
   NOTE: After locking the adjuster, pull back on the adjuster to make sure it is securely installed.

   Slide the release tab back to lock the adjuster.

Courtesy of FORD MOTOR COMPANY

1. 8.
   
   Verify the vehicle starts in PARK and NEUTRAL only and the reverse lamps illuminate in REVERSE.