Component Description

Front Park Or Turn Or Warn LED Assembly 

The front park or turn or warn assemblies are mounted in the headlamp assemblies. The standard park or turn bulb is replaced with an LED assembly that functions as a parking and turn signal lamp, as well as a warn flasher. The LH and RH front park or turn or warn assemblies are optically unique and not interchangeable. The warn Control Module controls the warn portion of the front park or turn or warn assemblies flash rate and synchronization. The BCM-B controls the park or turn function of the front park or turn or warn assemblies.

Tail Lamp Flashing LEDs 

The tail lamp flashing LEDs are mounted in the tail lamp assemblies. The tail lamp flashing LEDs operate independently of the park, turn and stoplamps.

Grille, High Mounted and Decklid Flashing LEDs 

Each of the grille, high mount and liftgate flashing LEDs consist of 6 LEDs that flash in a variety of patterns.

Warn Module 

The warn module controls the output to the front park or turn or warn LEDs, as well as the flashing pattern.

Lighting Relay Center 

The vehicle is equipped with a lighting relay center when not equipped with a factory installed siren.

The lighting relay center controls the flashing LEDs. A switch pad, installed by the customer, controls the internal relays to turn the 4 flashing LED zones on and off.

Lighting And Siren Control Module 

The vehicle is equipped with a lighting and siren control module when equipped with a factory installed siren.

The lighting and siren control module controls the flashing LEDs and siren/speaker system. It uses a switch pad, installed by the customer, to control FET protected outputs to turn the 4 flashing LED zones on and off. It also has a microphone input and a built-in amplifier to power the siren/speaker system.