Valve Springs: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE: Check the seating of the valve collet.

1.
Install the valve spring and the valve spring retainer.
- Using 303-300 T87C-6565-A, 303-350 T89P-6565-A, 303-472 T94P-6565-AH and 303-1249 compress the valve spring and install the valve collet using some grease and a small screwdriver.

GFD34247

Courtesy of FORD MOTOR COMPANY

2.

Disconnect the compressed air supply.

3.

Repeat the appropriate removal and installation steps for all of the other cylinders.

4.

Install the spark plugs. Refer to SPARK PLUGS .

5.

Install the valve tappets. Refer to Valve Tappets .