Removal And Installation: Seat: Installation

1.

Install the third row seat and the 4 mounting bracket-to-floor bolts.
- Tighten to 80 Nm (59 lb-ft).

2.

If equipped, connect the electrical connector and attach the wire harness retainers.

3.

Attach the 2 load floor supports.

4.

If equipped, disconnect the third row power fold seat control switch.

5.

Install the LH and RH quarter trim panels. REFER to Interior Trim and Ornamentation - Without Inflatable Safety Belts or REFER to Interior Trim and Ornamentation - With Inflatable Safety Belts. .