Rain Sensor Bracket: Installation

NOTE: The rain sensor bracket primer and adhesive are not included in service kit (part number 19G382) and will have to be ordered separately. The rain sensor bracket primer and adhesive part numbers and ordering instructions are available in the parts ordering system.

1.

NOTE: Use only a plastic scraper or damage to the ceramic paint on the windshield can occur.

NOTE: Use care when cleaning off residual glue from windshield or damage to the windshield camera defroster can occur.

General Equipment: Plastic Scraper.

Courtesy of FORD MOTOR COMPANY

2.

Clean the specified component with the specified material.
- General Equipment: Isopropyl Alcohol.

Courtesy of FORD MOTOR COMPANY

3.
- Apply the fluid.
- General Equipment: Cotton Swab.

Courtesy of FORD MOTOR COMPANY

4.

NOTE: Glass must be clean and dry.

NOTE: Take care not to apply primer to the clear sensor window.

General Equipment: Cotton Swab.

Courtesy of FORD MOTOR COMPANY

5.
- Apply a continuous bead of the specified diameter from the specified tube.
- Working time: 90 s.

Courtesy of FORD MOTOR COMPANY

6.

NOTE: Do not apply masking tape onto the rain sensor view window area.

Apply tape to specified component or area.

Courtesy of FORD MOTOR COMPANY

7.

Wait time: 6 h.

Courtesy of FORD MOTOR COMPANY

8.

Install the rain sensor. Refer to Rain Sensor .