PINPOINT TEST A : Inner Edge, Shoulder Wear

A1 MEASURE THE TREAD DEPTH

Using a tread depth gauge or similar tool, measure the inside edge/shoulder tread depth.

Is the tread depth greater than 1.588 mm (0.0625 in) ?

Yes	ROTATE the wheel and tire assemblies. CHECK and ADJUST the toe to nominal +0.15 degrees (toe in). CHECK and ADJUST caster and camber to nominal. REFER to Suspension System - General Information .
No	INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to Suspension System - General Information .