PINPOINT TEST BK : B140D:11, B140D:12, B140D:13 and B140D:1A: Notes
Diagnostic Overview
B140D:11, B140D:12, B140D:13 and B140D:1A
Refer to SUPPLEMENTAL RESTRAINT SYSTEM for schematic and connector information.
On vehicles equipped with inflatable safety belts, the RCM monitors the second row right safety belt buckle switch circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted second row right safety belt buckle switch
If a fault is detected, the RCM stores DTC B140D:11, B140D:12, B140D:13 or B140D:1D in memory and sends a message to the IPC to illuminate the airbag warning indicator.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B140D:11 | Second Row Passenger Side Seatbelt Sensor: Circuit Short to Ground | A fault is indicated when the RCM senses a short to ground on the second row right safety belt buckle switch |
| B140D:12 | Second Row Passenger Side Seatbelt Sensor: Circuit Short to Battery | A fault is indicated when the RCM senses a short to voltage on the second row right safety belt buckle switch |
| B140D:13 | Second Row Passenger Side Seatbelt Sensor: Circuit Open | A fault is indicated when the RCM senses an open on either second row right safety belt buckle switch circuit. |
| B140D:1D | Second Row Passenger Side Seatbelt Sensor: Circuit Current Out of Range | A fault is indicated when the RCM senses current out of an acceptable range on the second row right safety belt buckle switch circuit. |
Visual Inspection and Diagnostic Pre-checks
- Inspect for a damaged second row right inflatable safety belt buckle
- Inspect for damaged wiring harness(es)
- Inspect for loose or damaged connectors