Pinpoint Test E : The Remote Start Is Inoperative: Notes

Diagnostic Overview 

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to Service Information for information regarding Ford-specific diagnostic practices.

The factory equipped remote start system enables the engine to be started from up to 100 meters (328 feet) away by pressing the IKT or Intelligent Access (IA) key lock button followed by 2 presses of the remote start button. The 3 button presses must occur within 3 seconds. The IKT or Intelligent Access (IA) key signal is received through an internal antenna in the TPM module and communicated over the MS-CAN to initiate the vehicle start.

Possible Sources 

• Integrated Keyhead Transmitter (IKT) (without Push Button Start)
• Intelligent Access (IA) key (with Push Button Start)
• Hood switch
• Wiring, terminals or connectors

Visual Inspection and Diagnostic Pre-checks 

• Verify the remote start feature is enabled.
• Verify the ignition is OFF.
• Inspect the IKT (without Push Button Start).
• Inspect the Intelligent Access (IA) key (with Push Button Start).
• Inspect the hood switch.