P1015 - WASTEGATE Control Pressure Lower Than Expected - DTC Chart
P1015 - WASTEGATE CONTROL PRESSURE LOWER THAN EXPECTED - DTC CHART
| Description: This DTC sets when the measured wastegate vacuum sensor reading is less than the expected reading by greater than the calibrated threshold and the fault timer has exceeded the calibrated time threshold. | |||
Possible Causes:
|
|||
| Diagnostic Aids: The typical difference threshold is 16.93 kPa (2.46 psi) and time threshold is 5 seconds. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HN . | ||