Roof Opening Panel Glass - Front Sliding: Removal

NOTE: The roof opening panel motor(s) must be initialized when repairs are carried out on any part of the roof opening panel system, including whenever:

the roof opening sliding glass or power shade motor has been removed from the roof opening panel system.
the roof opening panel glass has been removed from the roof opening panel system.
the roof opening panel assembly has been removed from the vehicle.
a new roof opening sliding glass or power shade motor has been installed.
a new roof opening panel glass has been installed.
a new roof opening panel assembly has been installed.

Refer to Roof Opening Panel Motor Initialization - Sliding Glass Panel and Refer to Roof Opening Panel Motor Initialization - Shade .

1.

Position the front sliding glass panel to the CLOSED position and the power shade to the full OPEN position.

2.

Unclip the top portion of the concertina blind and slide the concertina blind rearward to access the sliding glass screws.

3.

Remove the 4 front sliding glass panel screws.

4.

From the outside of the vehicle, remove the front sliding glass panel assembly.