Roof Opening Panel Glass - Rear Fixed: Installation
NOTE:
The roof opening panel motor(s) must be initialized when repairs are carried out on any part of the roof opening panel system, including whenever:
- the roof opening sliding glass or power shade motor has been removed from the roof opening panel system.
- the roof opening panel glass has been removed from the roof opening panel system.
- the roof opening panel assembly has been removed from the vehicle.
- a new roof opening sliding glass or power shade motor has been installed.
- a new roof opening panel glass has been installed.
- a new roof opening panel assembly has been installed.
Refer to Roof Opening Panel Motor Initialization - Sliding Glass Panel and Refer to Roof Opening Panel Motor Initialization - Shade .
- 1.
Install the rear fix glass panel on the roof opening panel frame assembly and install the 8 rear fixed glass panel screws.- Tighten to 5 Nm (44 lb-in).
- 2.
Install the roof opening panel frame assembly. Refer to Roof Opening Panel Frame .
- 3.
Check for correct alignment of the rear fixed glass panel. Refer to Roof Opening Panel Alignment - Rear .
- 4.
Initialize the sliding glass panel motor and the power shade motor. Refer to Roof Opening Panel Motor Initialization - Sliding Glass Panel and Refer to Roof Opening Panel Motor Initialization - Shade .