PINPOINT TEST B : B10D7:87 or B10D7:8F
- B1 CHECK THE PATS KEYS
- Check that the correct PATS keys are used with the vehicle. Refer to Passive Anti-Theft System (PATS) - Without Intelligent Access (IA) , IKT.
Are the correct keys being used?
Yes GO to B2. No OBTAIN the correct key(s) for the vehicle. PROGRAM the new key(s). Refer to Key Programming Using Diagnostic Equipment or Refer to Key Programming Using Two Programmed Keys . - B2 ISOLATE THE PATS KEYS
- Place a PATS key in the ignition and turn to the ON position.
- Using a scan tool, clear BCM CMDTCs.
- Cycle the ignition from ON to OFF and then back to the ON position.
- Using a scan tool, perform the BCM self-test.
Is DTC B10D7:87 or B10D7:8F retrieved for both keys?
Yes INSTALL a new PATS transceiver. Refer to Passive Anti-Theft System (PATS) Transceiver . No DISCARD the key in question and PROGRAM a new key. Refer to Key Programming Using Diagnostic Equipment or Refer to Key Programming Using Two Programmed Keys .