LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Maintenance >> Maintenance Reminder Light (Reset Procedures) >> Engine Oil Replacement Reminder >> Engine Oil Replacement Reminder Reset - Procedure 05

Engine Oil Replacement Reminder Reset - Procedure 05

NOTE: This procedure resets the oil life telltale in the Instrument Panel Cluster (IPC), and the oil change reminder message in the message center display.
NOTE: For some 2017 Super Duty Series Pickups, PROCEDURE 24  might be the appropriate reset procedure.
  1. Turn the ignition switch to the RUN position (do not start the engine)
    NOTE: For vehicles with push-button start, press and hold the start button for two seconds without pressing the brake pedal. Do not attempt to start the engine.
  2. Press the brake and accelerator pedals at the same time.
  3. Keep the pedals fully depressed.
  4. After three seconds, the "Service: Oil reset in prog." message will be displayed.
  5. After 25 seconds, the "Service: Oil reset complete" message will be displayed.
  6. Release both the accelerator and brake pedals.
  7. The "Service: Oil reset complete" message will no longer be displayed.
  8. Rotate the key to the OFF position.
    NOTE: For vehicles with push-button start, push the start/stop switch to turn the vehicle off completely.
  9. Start the vehicle. Make sure that the oil life telltale is not illuminated in the IPC, and the oil change reminder message is no longer displayed in the message center.
scientia non olet · About LEMON Manuals