Owner's Manual 1
NOTE:
To reset the oil service light and clear the oil change message after servicing use the following procedure:
- Begin with the ignition off.
- Turn the key to the accessory position for keyed vehicles and for push button start vehicles press the Start/Stop button once quickly. DO NOT attempt to start the engine.
- Press the brake and accelerator pedals at the same time. Hold down fully for at least 20 seconds.
- Release both the accelerator and brake pedals.
- ENGINE OIL CHANGE DUE NEXT SERVICE and [Wrench & Oil Can icon] will display in the message center.
- Rotate the key to the OFF position.
- Turn the vehicle off. The message and lights will be cleared.