With Base Instrument Cluster
NOTE:
All message center functions are carried out using the single stem SELECT/RESET button in the Instrument Cluster (IC).
Oil Life Reset
- Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.
- Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET = NEW.
- Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
- Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.
Oil Life Start Value
- Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.
- Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET = NEW.
- Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
- Continue to hold the SELECT/RESET button until the oil life begins to decrease in value (from 100% down to 10%), continuing to hold until the desired start value is displayed.
- Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.
NOTE:
The oil life start value reduces by 10% for each second that the SELECT/RESET button is held once the oil life start value begins decreasing.