Toe Adjustment - Rear

General Procedure 

• 1.
  
  Using alignment equipment and the manufacturer's instructions, measure the rear toe.

• 2.
  
  Start the engine and center the steering wheel.

• 3.
  
  Turn the engine OFF and, using a suitable steering wheel holding device, lock the steering wheel in the straight-ahead position.

• 4.
  
  Loosen the tie-rod jam nuts.

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Rotate the toe link adjusting rod until the toe setting is within specifications.

Courtesy of FORD MOTOR COMPANY

• 6.
  
  
  NOTE: Do not allow the adjusting rod to rotate while tightening the jam nuts.

  Tighten the tie-rod jam nuts.

  • Tighten to 80 Nm (59 lb-ft).

• 7.
  
  Recheck the rear toe and adjust as necessary.