LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Removal And Installation >> Remote Function Actuator (RFA) Module >> Removal

Remote Function Actuator (RFA) Module: Removal

    NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation.

  1. 1.
    Upload the module configuration information from the RFA module into the scan tool by following the scan tool on screen instructions.

  1. 2.

    Remove the glove box. REFER to Instrument Panel and Console .

  1. 3.

    Remove the RFA module.

    1. 1.

      Disconnect the RFA module electrical connectors.

    1. 2.

      Remove the RFA module nuts.
scientia non olet · About LEMON Manuals