Pinpoint Test O : The Active Park Assist System Does Not Offer Available Parking Spaces
- O1 PERFORM A NETWORK TEST
- Using a scan tool, perform the network test.
Do all modules pass the network test?
Yes GO to O2. No REFER to Module Communications Network - O2 CHECK THE PAM CMDTCs
- Using a scan tool, check the PAM CMDTCs.
Are any DTCs present?
Yes DIAGNOSE all PAM DTCs. REFER to Parking Aid . No GO to O3. - O3 CHECK THE STEERING WHEEL ROTATION SENSOR
- Using a scan tool, view the SCCM PID : SW_ANGLE
Is the PID value within 45 ° of the actual steering wheel angle?
Yes The system is operating correctly at this time. The concern may have been caused by the vehicle operating conditions. No PERFORM the clockspring adjustment procedure and RECHECK the PID. REFER to REFER to Supplemental Restraint System . If the PID value is not within 45 ° of the actual steering wheel angle after the clockspring adjustment is complete, INSTALL a new steering wheel rotation sensor. REFER to Anti-Lock Brake System (ABS) and Stability Control .