Symptom Chart: Parking Aid - Video
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to SERVICE INFORMATION , Diagnostic Methods for information regarding Ford-specific diagnostic practices.
Symptom Chart: Parking Aid - Video
| Condition | Possible Sources | Actions |
| The rear video is inoperative | Fuse Wiring, terminals or connectors Video camera APIM BCM |
GO to Pinpoint Test I . |
| The FDIM displays PLEASE CHECK SURROUNDINGS FOR SAFETY and a black screen/no image or displays an error message | Fuse Wiring, terminals or connectors Video camera APIM BCM |
GO to Pinpoint Test I . |
| Static/flashing/blinking/flickering/scrolling or rolling image/screen/scrolling horizontal lines | Wiring, terminals or connectors Video camera |
GO to Pinpoint Test J |
| Poor image quality (foggy/cloudy/fuzzy/blurry/hazy image or moisture/water in lens or black spots) | Wiring, terminals or connectors Video camera |
GO to Pinpoint Test J |
| Manual zoom function is inoperative | Manual zoom feature is disabled Video camera |
CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration. GO to Pinpoint Test L . |
| Fixed guidelines are not displayed on the video image | Fixed guidelines feature is disabled Video camera |
CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration. GO to Pinpoint Test M . |
| Active guidelines are not displayed on the video image | Video camera not configured after replacement | CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration. |
| Active guidelines feature is disabled Steering wheel position data error Video camera |
GO to Pinpoint Test M . | |
| Video camera delay feature is inoperative | Video camera delay feature is disabled | ENABLE the video camera delay feature within the FDIM |
| All other image concerns | Video camera | GO to Pinpoint Test I |