Vacuum Leaks and Unmetered Air

With this condition, the engine may actually run lean of stoichiometry (14.7:1 air to fuel ratio) if the PCM is not able to compensate enough to correct for the condition. This condition can be caused by unmetered air entering the engine. Vacuum leaks normally are most apparent when high manifold vacuum is present (for example, during idle or light throttle). If freeze frame data indicates the fault occurred at idle, a check for vacuum leaks and unmetered air might be the best starting point.

For example, loose, leaking or disconnected vacuum lines, intake manifold gaskets or O-rings, throttle body gaskets, brake booster, air inlet tube or unseated engine oil dipstick.